How To Fix Roof Leak

Roof leaks are very common but a very sensitive issue. Being one of the most trusted services for roofing repair in Santa Clarita, Lawsons Roofing brings a basic overview of how to fix any roof leaks. However, it is always recommended to consult an experienced roofer in Santa Clarita to fix any leaks in the roof.

Tools you need

To fix any kind of leaks in your roof, you need to possess the following tools:

  • Utility knife
  • Tape measure
  • Flat pry bar
  • Caulking gun
  • Ladder and personal safety appliances

Apart from the following, you need to have a Hammer, Circular saw Chalk line, required lights, Hook blade shingle cutter.

Materials you may require

You need to arrange several materials including:

  • Composite shingles
  • Roofing nails
  • Synthetic underlayment
  • 8d nails
  • Roofing cement
  • Exterior sealant
  • Roof vent (if required )
  • 7/16-inch exterior-grade OSB board

The entire process at a glance

Identify the roof leak

Inspect the roof to identify the leak in it.

Examine and remove the damaged vent

If you find leaks in the roof vent, check the condition of the entire vent and remove it if required and replace it with a new one.

Check old shingles

If the leak is traced in old shingles, please consider checking it thoroughly and tear off the old roofing paper properly. Keep the process intact as much as possible.

Cut the damaged roof deck

You need to chalk down the damaged section of the roof and cut the damaged area properly.

Remove the deck and attach a new one

Remove the old roof deck and attach the new roof deck with 8d nails.  Please be very careful.

Lay paper and involves the first shingles row

Overlap the decks with roofing papers. Then you need to establish the first row of shingles very carefully.

Complete the process

Work until you finish setting up every row of shingles. If you find the process difficult, you may reach Lawsons Roofing, the best roofer in Santa Clarita.

Leave a reply

Your email address will not be published. Required fields are marked *